Pool fencing in Castle Hill and Baulkham Hills
Pool Fence Doctor builds and fixes pool fences in Castle Hill and Baulkham Hills, the part of The Hills Shire within Peter's range, about 11 to 12 km from his base in Denistone East.
Dots mark the councils Peter covers; the ring is 15 km from Ryde. Swipe the map sideways to see it all. Map: Google. Open the area in Google Maps
How high must a boundary fence be when it is part of the pool barrier?
The Hills Shire Council answers this on its own pool page: a boundary fence that forms part of the barrier needs to be at least 1800mm, measured from inside the pool area. That last part catches people out on sloping Castle Hill blocks, where the pool side is often higher than the neighbour's. Council adds that an older pool which has kept full compliance with an older Australian Standard may differ, and that new screening or plants must not weaken the barrier.
For new pools, council's plan keeps them out of the front and secondary street setbacks and asks for at least 1m from the waterline to side and rear boundaries. Peter's page on boundary fences that fail as pool barriers explains how a short or climbable neighbour's fence is brought up to height.
Front and side fences in Castle Hill and Baulkham Hills
Where a fence cannot go up as exempt development, The Hills DCP asks for front fencing that matches the height, scale and style of the street, and where a street has no front fences, front fences are not supported. Anything over 1.2m out the front must be open style and set back at least 500mm from the boundary for planting. Corner blocks are judged on traffic visibility, and side and rear boundary fences top out at 1.8m. Dividing fences between neighbours fall under the Dividing Fences Act 1991.
Dural, at the northern edge of Peter's range, is split between The Hills and Hornsby Shire, so check which council your address falls in before relying on either set of rules.
Heritage Park, bushfire maps and trees
Next to Heritage Park in Baulkham Hills there is a heritage buffer zone where fencing is limited to low, open, rural-style fencing, and swimming pools are not permitted at all. Elsewhere, council's heritage fact sheet says consent is needed for most work affecting a heritage item and that a listing generally covers the whole property; its heritage controls also reach neighbouring land within view of a heritage site, where new fences should suit the period of the building and high solid walls are avoided.
Council publishes bush fire prone land map sheets and an online map that shows whether your property is affected. Under the NSW exempt fence rules, a fence on bush fire prone land has to be non-combustible or hardwood, which suits aluminium and glass barriers.
The Hills' tree rules ask for consent before substantially changing the soil level within 3m of a tree's trunk or pruning more than 10% of it, and its landscaping controls ask builders to choose footings that spare mature trees and to fence off kept trees at the drip line during work. In a mapped floodway or flow path, fencing must be open style so it lets floodwater through and cannot become debris.
Which Hills suburbs does Peter cover?
Castle Hill and Baulkham Hills. Suburbs further out in the shire, such as Kellyville and Bella Vista, are beyond the 15 km Peter generally travels.
- Baulkham Hills11 km from Ryde
- Castle Hill12 km from Ryde
Where do these rules come from?
These facts come from The Hills Shire Council's own pages and its Development Control Plan (Part B Section 2 Residential, and Part C Sections 3, 4 and 6), plus the NSW Government's fact sheet on exempt fences and the NSW Electoral Commission's council suburb lists.
- The Hills Shire Council: pool and spa regulations
- The Hills Shire Council: development control plan
- The Hills Shire Council: bush fire prone land
- The Hills Shire Council: trees on private land
- The Hills Shire Council: protecting our heritage
- NSW Electoral Commission: The Hills Shire localities
- NSW Government: fences, rules for exempt and complying development
Nearby, see pool fencing in Hornsby, pool fencing in Parramatta and pool fencing in Merrylands and Cumberland, or every council on the areas map.
Pool fencing in Castle Hill and the Hills: questions
How high must a boundary fence be if it is part of a pool barrier in The Hills?
The Hills Shire Council's pool page says at least 1800mm, measured from inside the pool area. It notes this may vary for an older pool that has kept full compliance with an older Australian Standard.
Can I build a pool next to Heritage Park in Baulkham Hills?
Not in the heritage buffer zone. The Hills DCP says swimming pools will not be permitted there, and fencing in the buffer zone is limited to low, open, rural-type fencing.
Ask about a fence in Castle Hill and the Hills
Tell Peter what failed, or what you want built. He replies with a quote and, where there is one, a cheaper way to comply.
The notice
The council or certifier's written notice, if you have one.
A few photos
The fence, the gate and anything near them.
The gate
Whether it shuts and latches on its own from any position.
Request a quote online
Peter takes every quote request through one online form, so each enquiry, notice and photo stays together. It asks for:
- Your name, email and phone number
- The address of the pool
- What failed, or what you want built
- The notice and photos, attached from your phone or computer
Opens Pool Fence Doctor's quote request on ServiceM8. How your details are used
Prefer to talk? Call 1300 304 800, Monday to Friday, or see every way to reach Pool Fence Doctor.