Pool fencing in Ryde
Pool Fence Doctor builds and fixes pool fences across the City of Ryde, from Eastwood and Marsfield down to Putney and Tennyson Point, and this is home ground: Peter works from Denistone East.
Dots mark the councils Peter covers; the ring is 15 km from Ryde. Swipe the map sideways to see it all. Map: Google. Open the area in Google Maps
What does Ryde allow for front and side fences?
The City of Ryde's plan for houses keeps a solid front or return fence to 900mm and an open lightweight one, such as timber pickets, to 1m. A front fence can reach 1.8m only if it is at least half open, on a solid base no higher than 900mm, and only arterial roads get solid masonry to 1.8m. Front and return fences may not be Colorbond or timber paling, piers stop at 350mm wide, and any retaining wall built into a front fence stops at 900mm. Heights are measured from the footpath or verge.
Side and rear fences top out at 1.8m, which is also the height a neighbour's fence needs when it forms part of a pool barrier. Where there is a view to the water from the street, fences over 900mm have to be 70% open, and fencing that blocks a corner or driveway sight line is splayed. Peter's page on boundary fences that fail as pool barriers covers the rest.
Bushland along the Lane Cove River
Ryde sits on the divide between the Parramatta and Lane Cove rivers, and Lane Cove National Park runs 374 hectares of remnant bushland along its eastern side. Council's bush fire prone land map, updated in February 2018 and certified by the RFS, shows which blocks are affected; council recalls the major fires in the Lane Cove River valley in 1994, and any development application on mapped land needs a bushfire assessment report.
Under the NSW exempt fence rules, a fence on bush fire prone land must be non-combustible or hardwood, so on those streets the choice is aluminium or glass rather than treated pine.
Overland flow, floods and the foreshore
Ryde's plan wants fencing to be open wherever overland flow runs, front, side and rear, so it does not hold water back, and any fencing in front of the foreshore building line along the Parramatta River has to be open and permeable. On flood-affected land its stormwater plan asks for fences that are permeable, open or frangible so floodwater can pass, using 200mm above ground as the level where the flood level is unknown.
One flood-affected site in Eastwood shows how that plays out: council's planning panel required any fence angled across the flow path to use louvres, open pool-type fencing, frangible screens, battens or a floodgate. Open aluminium pool fencing is a ready answer on lots like that.
Heritage and trees, close to home
Two of Ryde's newest heritage conservation areas, Chatham Road and Darvall Estate, are in Denistone, right next to Peter's base, created with Tyrell Street in Gladesville in November 2020. In the Eastwood House Estate, a Californian Bungalow suburb subdivided in 1915, front fences stay at 1m or lower and nothing but the front fence may sit in front of the building line. Work to a heritage property generally needs consent, though council has a minor works exemption form.
Ryde treats all vegetation as protected unless a tree is under 4m tall or has a trunk under 150mm at chest height. Cutting roots thicker than 30mm, or digging, compacting or filling inside a tree's protection zone, counts as tree work needing a permit, and that includes a tree on the neighbour's side. Council's own tree manual lists localised pier footings and screw piles as tree-sensitive ways to build, and both suit a fence.
Which Ryde suburbs does Peter cover?
All of them, and none is more than a few minutes away. The list below runs from Ryde itself out to Tennyson Point on the river, measured in a straight line from Ryde.
- Ryde0 km from Ryde
- Denistone East1 km from Ryde
- Denistone2 km from Ryde
- Eastwood2 km from Ryde
- Meadowbank2 km from Ryde
- Denistone West3 km from Ryde
- Marsfield3 km from Ryde
- Putney3 km from Ryde
- Macquarie Park3 km from Ryde
- Melrose Park3 km from Ryde
- Gladesville4 km from Ryde
- Tennyson Point4 km from Ryde
Where do these rules come from?
These facts come from the City of Ryde's own pages and its Development Control Plan 2014 (Parts 3.3, 5.2, 8.2 and 9.5), its Tree Management Technical Manual and its planning panel reports, plus the NSW Government's fact sheet on exempt fences.
- City of Ryde: development control plan
- City of Ryde: bushfire prone land
- City of Ryde: heritage review (new conservation areas)
- City of Ryde: city profile
- NSW Government: fences, rules for exempt and complying development
Nearby, see pool fencing in Canada Bay, pool fencing in Hunters Hill and pool fencing in Parramatta, or every council on the areas map.
Pool fencing in Ryde: questions
Can a front fence in Ryde be Colorbond?
No. City of Ryde's plan says front and return fences are not to be Colorbond or timber paling. Solid front fences stop at 900mm, timber pickets at 1m, and an open fence can reach 1.8m if it is at least 50% open.
Do post holes near a tree need a permit in Ryde?
They can. Ryde counts pruning roots thicker than 30mm, and digging, compacting or filling inside a tree's protection zone, as tree works needing a permit, including near a tree on the neighbour's land.
Ask about a fence in Ryde
Tell Peter what failed, or what you want built. He replies with a quote and, where there is one, a cheaper way to comply.
The notice
The council or certifier's written notice, if you have one.
A few photos
The fence, the gate and anything near them.
The gate
Whether it shuts and latches on its own from any position.
Request a quote online
Peter takes every quote request through one online form, so each enquiry, notice and photo stays together. It asks for:
- Your name, email and phone number
- The address of the pool
- What failed, or what you want built
- The notice and photos, attached from your phone or computer
Opens Pool Fence Doctor's quote request on ServiceM8. How your details are used
Prefer to talk? Call 1300 304 800, Monday to Friday, or see every way to reach Pool Fence Doctor.